DOOR HARDWARE
Door Hardware
Hardware for use on cabinet side panels and solid doors, and for use on wire doors.
RPC offers wood door hardware to match the mounting configuration also used on wire door cabinet designs such as the 2107 hinge and cabinet door hasps shown here.
Part Number: 2101
Wood Door Plate Holder
| Side Panel: | 3-3/16” wide x 1-1/2” high |
| Specify finish when ordering. |
Part Number: 2102
Inset Cabinet Hasp
| Height (A): | 63/64” (25mm) |
| Distance Between Holes (B): | 1-37/64” (40mm) |
| Specify finish when ordering. |
Part Number: 2103
Onset Cabinet Hasp
| Height (A): | 1-21/32” (42mm) |
| Distance Between Holes (B): | 1-37/64” (40mm) |
| Specify finish when ordering. |
Part Number: 2104
Onset Solid Door Hasp
| Height (A): | 1-17/32” (34mm) |
| Distance Between Holes (B): | 1-37/64” (40mm) |
| Mounting Hole Location (C): | 1-1/2” (38.2mm) |
| Specify finish when ordering. |
Part Number: 2105
Cabinet Hasp for Overlay Solid Doors
| Height (A): | 1-1/2” (38.2mm) |
| Distance Between Holes (B): | 1-37/64” (40mm) |
| Mounting Hole Location (C): | 1” (25.4mm) |
| Overlay: | 35/64” (14mm) |
| Specify finish when ordering. |
Part Number: 2106
Door Plate
| Size: | 1-37/64” (40mm) x 2-23/64” (60mm) |
| Vertical Slot: | 10mm x 40mm |
| Specify finish when ordering. |
Part Number: 2801-26B
Right Hand Cabinet Latch
| Height (A): | 1-5/8” (41.3mm) |
| Distance Between Holes (B): | 1-25/32” (45mm) |
| Mounting Hole Location (C): | 2-1/4” (57.2mm) |
| Available bright chrome plated only. |
Part Number: 2802-26B
Left Hand Cabinet Latch
| Height (A): | 1-5/8” (41.3mm) |
| Distance Between Holes (B): | 1-25/32” (45mm) |
| Mounting Hole Location (C): | 2-1/4” (57.2mm) |
| Available bright chrome plated only. |
Part Number: 2804-26B
Double Solid Door Latch
| Height (A): | 3/4” (19.1mm) |
| Distance Between Holes (B): | 1-37/64” (40mm) |
| Mounting Hole Location (C): | 1/2” (12.7mm) |
| Available bright chrome plated only. |
Part Number: 2813-26B
Double Solid Strike Plate
| Height (A): | 29/32” (23mm) |
| Distance Between Holes (B): | 1-37/64” (40mm) |
| Mounting Hole Location (C): | 21/64” (8.4mm) |
| Available bright chrome plated only. |
Part Number: 2814-26B
Thru Door Strike Plate for 13/16” Door
| Dimension: | 2-3/8” (60mm) x 1-9/16” (40mm) |
| Distance Between Holes: | 1-37/64” (40mm) |
| Mounting Hole Location (C): | 1-1/16” (27mm) |
| Available bright chrome plated only. |
Finishes
RPC’s in-house powder coating system allows us to match colors to meet your color specification. Our powder coating process provides you with a durable, epoxy-based finish.
Finish Codes: To simplify manufacturing control, RPC has reviewed and consolidated its finish offerings into Standard and Special colors. Standard colors will be stocked as noted for a given product.
Disclaimer:
Please note all finish swatches below are for web viewing purposes only. They are not intended to be exact replications of the finish. Consult factory for finish samples for an accurate representation.
Standard Powder Coat Colors
1D Gloss Black
23 Matte Black
E51 Gloss White
E47 Beige
E48 Dove Grey
P28 Chrome
Call for special color needs.
Warranty
Product Guarantee
Rockford Process Control warrants all Institutional Casework Products shipped to be free of defects in materials and workmanship.
Limited Warranty
Rockford Process Control, Inc. (RPC) warrants its Hinges and hardware against defects in material and workmanship for a period of twelve (12) months from the date of shipment.
RPC will send the original consumer purchaser, without charge, a new RPC Hinge to replace any defective RPC Hinge subject to this warranty. RPC specifically does not warrant removal of the defective Hinge or installation of a new Hinge. This warranty does not cover Hinges that have been incorrectly installed, exposed to excessive loads or abuse in any way. This warranty is a warranty of hardware replacement only. No other warranty is expressed or implied.
Rockford Process Control, LLC
4301 Kishwaukee St. Rockford, IL 61104
815.966.2001 | hardware@modernforge.com
Contact Us