HINGES / CASEWORK HARDWARE – INSTITUTIONAL HINGES
The “Rockford Hinge” – Five Knuckle Overlay Hinges
RPC hinges have been the industry standard for five-knuckle hinges for over 75 years! They exceed ANSI/BHMA 156.9 Grade 1 requirements. Hospital tips, 2-3/4” height, 270° opening angle, drilled knuckle ID with Teflon coated pins. All mounting holes are countersunk for #8 flat head screws.
Part Number: 374
| Side Panel: | 3/4” (19mm) |
| Door Thickness: | 3/4” (19mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 15/32” (11.9mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers with 37mm setback |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 376
| Side Panel: | 3/4” (19mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 15/32” (11.9mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers with 37mm setback |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 376SS
| Side Panel: | 3/4” (19mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 15/32” (11.9mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers with 37mm setback |
| Material: | .090” Type 304 stainless steel |
| Pack: | 50/case, cell packed |
Part Number: 375
| Side Panel: | 13/16” (20.6mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 17/32” (13.5mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers with 37mm setback |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 454
| Side Panel: | 3/4” (19mm) |
| Door Thickness: | 3/4” (19mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 15/32” (11.9mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | Side panel 32mm centers with 37mm setback, door wing holes 45mm on center |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 456
| Side Panel: | 3/4” (19mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 15/32” (11.9mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | Side panel 32mm centers with 37mm setback, door wing holes 45mm on center |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 848
| Side Panel: | 3/8” (9.5mm) |
| Door Thickness: | 3/4” (19mm) |
| Hinge Overlay: | 11/32” (8.7mm) |
| Door Overlay: | 1/8” (3.2mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | Staggered side panel mounting holes, can be used back-to-back on shared 3/4” side panel |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 849
| Side Panel: | 3/8” (9.5mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 11/32” (8.7mm) |
| Door Overlay: | 1/8” (3.2mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | Staggered side panel mounting holes, can be used back-to-back on shared 3/4” side panel |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 853
| Side Panel: | 5/8” (15.9mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 19/32” (15.1mm) |
| Door Overlay: | 11/32” (8.7mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | Staggered side panel mounting holes |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 8314
| Side Panel: | 1/2” (12.7mm) |
| Door Thickness: | 1/2” (12.7mm) |
| Hinge Overlay: | 1/2” (12.7mm) |
| Door Overlay: | 9/32” (7.1mm) |
| Gauge: | .090” (2.3mm) |
| Hole Pattern: | Commonly used with Phenolic Materials, 32mm centers with 37mm setback |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 8314SS
| Side Panel: | 1/2” (12.7mm) |
| Door Thickness: | 1/2” (12.7mm) |
| Hinge Overlay: | 1/2” (12.7mm) |
| Door Overlay: | 9/32” (7.1mm) |
| Gauge: | .090” (2.3mm) |
| Hole Pattern: | Commonly used with Phenolic Materials, 32mm centers with 37mm setback |
| Material: | .090” Type 304 Stainless Steel |
| Pack: | 50/case, cell packed |
Part Number: 8362
| Side Panel: | 5/8” (15.9mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 19/32” (15.1mm) |
| Door Overlay: | 11/32” (8.7mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers with 37mm setback |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 8362SS
| Side Panel: | 5/8” (15.9mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 19/32” (15.1mm) |
| Door Overlay: | 11/32” (8.7mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers with 37mm setback |
| Material: | .090” Type 304 Stainless Steel |
| Pack: | 50/case, cell packed |
Special Five Knuckle Overlay Hinges
RPC special overlay hinges will accommodate application requirements for doors with a thickness of up to 1-3/8” and side panels to 1” thick.
Part Number: 388
| Side Panel: | 1” (25.4mm) |
| Door Thickness: | 13/16” (20.6mm) |
| Hinge Overlay: | 1” (25.4mm) |
| Door Overlay: | 25/32” (19.8mm) |
| Gauge: | .083” (2.1mm) |
| Hole Pattern: | 1” side panel leaf |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 844
| Side Panel: | 5/8” (15.9mm) |
| Door Thickness: | 1-1/16” (27mm) |
| Hinge Overlay: | 19/32” (15.1mm) |
| Door Overlay: | 11/32” (8.7mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 32mm centers |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 7036
| Side Panel: | 3/4” (19mm) |
| Door Thickness: | 1-3/8” (34.9mm) |
| Hinge Overlay: | 23/32” (18.3mm) |
| Door Overlay: | 15/32” (11.9mm) |
| Gauge: | .095” (2.4mm) |
| Hole Pattern: | 1-1/4” side panel leaf |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Five Knuckle Lipped Hinges
RPC five-knuckle lipped hinges are designed for use with inset doors having a rabbet depth of 3/8”. Hospital tips are standard, contact RPC regarding your special needs.
Part Number: 349
| Rabbet Depth: | 3/8” (9.5mm) |
| Side To Hinge Center: | 25/64” (9.9mm) |
| Cabinet Wing Length: | 13/16” (20.6mm) |
| Rabbet Width: | 3/8” (10.3mm) |
| Height: | 2-1/2” (63.5mm) |
| Gauge: | .072” (1.8mm) |
| Hole Pattern: | Vertical side panel slot, horizontal door slot for easy mounting |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 362
| Rabbet Depth: | 3/8” (9.5mm) |
| Side To Hinge Center: | 7/16” (11.1mm) |
| Cabinet Wing Length: | 1-31/32” (50mm) |
| Rabbet Width: | 1/2” (13.5mm) |
| Height: | 2-3/4” (69.9mm) |
| Gauge: | .083” (2.1mm) |
| Hole Pattern: | Horizontal mounting slots on both side panel and door |
| Pack: | 100/case, cell packed |
| Specify finish when ordering. |
Part Number: 362SS
| Rabbet Depth: | 3/8” (9.5mm) |
| Side To Hinge Center: | 7/16” (11.1mm) |
| Cabinet Wing Length: | 1-31/32” (50mm) |
| Rabbet Width: | 1/2” (13.5mm) |
| Height: | 2-3/4” (69.9mm) |
| Gauge: | .083” (2.1mm) |
| Hole Pattern: | Horizontal mounting slots on both side panel and door |
| Material: | .078” Type 304 Stainless Steel |
| Pack: | 50/case, cell packed |
Finishes
RPC’s in-house powder coating system allows us to match colors to meet your color specification. Our powder coating process provides you with a durable, epoxy-based finish.
Finish Codes: To simplify manufacturing control, RPC has reviewed and consolidated its finish offerings into Standard and Special colors. Standard colors will be stocked as noted for a given product.
Standard Powder Coat Colors
1D Gloss Black
23 Matte Black
E51 Gloss White
E47 Beige
E48 Dove Grey
P28 Chrome
Plated Finishes
26D Dull Chrome
26S Brushed Chrome
Call for special color needs.
Ordering Information
Part # Example: Product Type: Product Number or Model: Finish Code:
376-P28 = 376 (Model No.) P28 (Chrome Powder Coat)
Part Numbering System: Product Type and/or Model Number followed by the Finish Code and Packing Code. (Examples above.)
Minimum Order Quantity:
5-Knuckle Hinges: 100 PCs per Part Number. Case Quantity: 100 PCs, Cell Packed
Stainless Steel Hinges: 50 PCs per Part Number. Case Quantity: 50 PCs, Cell Packed
Wire Pulls: 100 PCs per Part Number. Case Quantity: 100 PCs, Cell Packed
Wire Doors: No Minimum
Gravity Locks: 100 Sets per Part Number. Bulk Pack or Polybag (1-Set per Polybag)
Material: Cold Rolled Steel and 304 Stainless Steel
Material Thickness: As noted in hinge specification sheet
Barrel Height: 2-3/4″ for Overlay Hinges, etc.
Hospital Tips: Standard on all institutional, 5-knuckle hinge products.
Opening Angle: 270° for Overlay Hinges. 180° for Lipped, Flush and Butt Hinges
Smooth Operation: Drilled knuckle IDs and machined knuckle edges.
Pin: Non-Removable Knurled Pin
Finish: Standard and Custom Powder Coating and Plating
Quality: Independent tests conducted on representative RPC hinges show that
they meet or exceed ANSI/BHMA Grade 1, Standard No. A156.9
Warranty
Product Guarantee
Rockford Process Control warrants all Institutional Casework Products shipped to be free of defects in materials and workmanship.
Limited Warranty
Rockford Process Control, Inc. (RPC) warrants its Hinges and hardware against defects in material and workmanship for a period of twelve (12) months from the date of shipment.
RPC will send the original consumer purchaser, without charge, a new RPC Hinge to replace any defective RPC Hinge subject to this warranty. RPC specifically does not warrant removal of the defective Hinge or installation of a new Hinge. This warranty does not cover Hinges that have been incorrectly installed, exposed to excessive loads or abuse in any way. This warranty is a warranty of hardware replacement only. No other warranty is expressed or implied.
Rockford Process Control, LLC
4301 Kishwaukee St. Rockford, IL 61104
815.966.2001 | hardware@modernforge.com
Contact Us